Dafram OIL and GAS Products
Multiport Selector Valve (MSV)
The Multiport Selector Valve consists in one steel body with eight inlets and two outlets, one of the outlets is common for production and the other outlet can be selected a well to test, all of them with flanged connections or threaded NPT, with this configuration is possible to receive the flow from seven oil or gas wells.
The valves sizes are:
2”x 4” (8 inlets of 2”, test outlet of 2” and group outlet of 4”)
3”x 6” (8 inlets of 3”, test outlet of 3” and group outlet of 6”)
4”x 8” (8 inlets of 4”, test outlet of 4” and group outlet of 8”)
The inlets and outlets can be flanged or NPT design for ASME/ANSI Class 150, 300, 600, 900 and 1500.
Standard Construction Materials:
Body: ASTM A350 LF2.
Bonnet cover: ASTM A350 LF2
Body Gasket: Spiral wourd gaskets: AISI 304 + graphite.
Rotor: ASTM A350 LF2
Flanged connections: ASTM A351 Gr. CF3M.
Sealing element: PTFE + Carbon.
O´Rings: AFLAS.
Studs: ASTM A 193 B7. Nuts A 194 2H.
Other materials such as steel 316 and duplex, or Electroless Nickel Coating are available
OIL AND GAS SKID PRODUCTION PAD
The heart of the skid production pad is the Multiport Selector Valve, which has a smart actuator. The skid has 8 inlets and 2 outlets (7 inlets are for oil or gas wells and 1 inlet is blind, it is used for maintenance), as well as of its 2 outlets (Production and test), all with the corresponding, ball valves, check valves, relief and drain valves, pressure and temperature transmitters, so therefore, when the skid is received in the field, it is ready for connection, commissioning and subsequent operation. Don't need painting, welding, or field testing.
- Modular, Compact and self contained.
- Combined solution Multiphase Meter – Multiport Selector Valve.
- The Skid has a smaller ecological impact, because it reduced footprint, it is ideal for offshore applications.
- Low maintenance.
- No concrete foundations required.
- It can be delivered, installed, commissioned and start up within a few days.
- Multiphase meter test on-line (in-situ.)
- The systems are complete tested in factory, (customer evaluation, Dye penetrant inspection, pressure test, RX inspection, functional tests)
- High specification paint finish for corrosion protection.
- H2S Service parts designed for hydrogen sulfide corrosion resistance.
- Can be connected in cluster (several skid connections for 14, 21, 28 or more wells)
|
